Minimed Reservoir 3ml Coupons & Savings Card – Discount Prices from $132.71

When using the MiniMed 3.0 mL reservoir, it's crucial to be aware of certain risks to ensure safe and effective insulin delivery:

• Single-Use Only: The reservoir and transfer guard are designed for one-time use. Reusing them can lead to insulin degradation, infection, inaccurate medication delivery, or leaks that may damage the pump.

• Sterility Concerns: Do not use the reservoir if its packaging is opened or damaged, as this compromises sterility and increases the risk of infection.

• Air Removal: Ensure all air is removed from the reservoir before use. Trapped air can cause inaccurate insulin delivery.

• Liquid in Tubing Connector: If insulin or any liquid enters the tubing connector, it can block vents necessary for proper filling of the infusion set. This may result in delivering too much or too little insulin, potentially causing high or low blood sugar levels. If this occurs, replace both the reservoir and infusion set.

• Proper Locking: Ensure the reservoir is securely locked into the pump. A loose reservoir can lead to incorrect insulin delivery, increasing the risk of high or low blood sugar.

• Temperature Considerations: Use insulin at room temperature when filling the reservoir. Once filled, use the reservoir promptly and do not store it for future use.

• Leak Checks: After changing the reservoir and infusion set, check for leaks to prevent inaccurate insulin delivery.

• Initial Setup: Conduct the first setup of the reservoir in the presence of a healthcare professional to ensure proper use.

By adhering to these guidelines, you can minimize risks associated with the MiniMed 3.0 mL reservoir and maintain effective diabetes management.

The MiniMed 3.0 mL reservoir is designed for the subcutaneous infusion of insulin using compatible Medtronic insulin pumps and infusion sets. While the reservoir itself is not directly associated with side effects, improper use or device malfunctions can lead to serious health issues. One potential risk is insulin leakage from the reservoir, which can result in the delivery of less insulin than intended. This under-delivery may cause hyperglycemia (high blood sugar), leading to symptoms such as nausea, vomiting, and, in severe cases, diabetic ketoacidosis (DKA). For instance, in 2013, certain batches of Medtronic MiniMed insulin reservoirs were recalled due to an increased risk of leakage, highlighting the importance of using only reservoirs from unaffected batches. Conversely, over-delivery of insulin can occur if the reservoir is not properly locked into the pump, potentially leading to hypoglycemia (low blood sugar). Symptoms of hypoglycemia include shaking, confusion, and, if untreated, loss of consciousness. Reports have indicated instances where users experienced hypoglycemia due to over-delivery anomalies associated with the insulin pump system. To minimize these risks, it's crucial to:

• Use the reservoir and transfer guard only once, as they are sterile and nonpyrogenic. Reusing them can lead to insulin degradation, infection, inaccurate medication delivery, or leaks that may damage the pump.
• Ensure insulin is at room temperature before filling the reservoir, and use the filled reservoir promptly without storing it.
• Check for leaks after changing the reservoir and infusion set.
• Conduct the initial setup in the presence of a healthcare professional. Additionally, always verify that the reservoir is properly locked into the pump to prevent over or under-delivery of insulin. Regularly inspect the pump's retainer ring for any signs of damage, as a broken or missing retainer ring can prevent the reservoir from locking correctly, leading to insulin delivery issues. By adhering to these guidelines and promptly addressing any device concerns, users can effectively manage their insulin therapy and reduce the risk of adverse events.

The MiniMed® 3.0 mL reservoir is designed for use with Medtronic MiniMed Paradigm® 5 and 7 Series insulin pumps and is compatible with all Medtronic MiniMed infusion sets. This reservoir can hold up to 3.0 mL (300 units) of insulin, providing flexibility for users with varying insulin requirements.

For individuals with a total daily insulin dose of less than 48 units, using the 1.8 mL reservoir may be more appropriate. This smaller reservoir holds up to 1.8 mL (180 units) of insulin and is also compatible with the same Medtronic MiniMed Paradigm® pumps and infusion sets.

It's important to note that the Medtronic Extended™ infusion set and Extended™ reservoir are designed for up to 7 days of wear and are compatible with MiniMed™ 780G, 770G, 670G, and 630G insulin pumps. These extended-wear products are not compatible with MiniMed™ Paradigm® systems.

When selecting a reservoir size, consider your total daily insulin dose and consult with your healthcare professional to determine the most suitable option for your needs.